#RX-600 is open lens type reflective material with 100% Polyester backing. Bright grey colored #RX-600 has excellent retro-reflective performance and complies with requirements of BS EN471 .
-APPLICATION INSTRUCTION
#RX-600 is easy to be slit cut or simple cut by hand with scissors or shears. Sew cur pieces to a garment or other product with 7-10 stitches per inch(3-4 stitches per cm), inset at least 5/64"(2mm) from the edge of the reflective. Use a flat bed lock stitch machine(preferably needle feed) with minimum thread tention and a Teflon coated foot with minimum foot pressure.
-APPLICATION INSTRUCTION
#RX-600 is easy to be slit cut or simple cut by hand with scissors or shears. Sew cur pieces to a garment or other product with 7-10 stitches per inch(3-4 stitches per cm), inset at least 5/64"(2mm) from the edge of the reflective. Use a flat bed lock stitch machine(preferably needle feed) with minimum thread tention and a Teflon coated foot with minimum foot pressure.
Configulation : Microscopic glass beads
Size : 110cm X 50meter/roll
Use : Safety garment, Cap, Gloves, Shoes, Belt, Back pak
Performance : 550~630Cd/Lux.?(E/A:-4 ° O/A: 0.2 ° )
Type : Reflective fabric
#RX-600 Test Results : Test Report No. 13002519 by TÜV
Retro-reflective performance requirements of new material
Observation Angle |
Entrance Angle |
Minimum Requirement |
Measured value cd/lux/m2 |
12' |
50 |
330 |
426.2 |
200 |
290 |
420.2 |
|
300 |
180 |
386.9 |
|
400 |
65 |
321.2 |
|
20' |
50 |
250 |
299.4 |
200 |
200 |
296.9 |
|
300 |
170 |
278.0 |
|
400 |
60 |
234.3 |
|
60' |
50 |
25 |
27.7 |
200 |
15 |
27.3 |
|
300 |
12 |
26.9 |
|
400 |
10 |
25.2 |
|
90' |
50 |
10 |
17.7 |
200 |
7 |
16.9 |
|
300 |
5 |
15.8 |
|
400 |
4 |
13.0 |
Minimum
Requirement
Measured value
cd/lux/m2
cd/lux/m2
After abrasion
100
405.3
After flexing
100
412.2
After folding at cold temps
100
394.0
After temperature variation
100
381.4
After washing - 25 cycles at 600C
100
122.3
After dry-cleaning - 5 cycles
100
411.3
After influence of rainfall
100
314.1
Test in accordance with EN471